GDL G2 Flash File (Firmware) MTK MT6261 – 100% Tested Stock ROM

on

 If you are a mobile hardware/software technician searching for the official GDL G2 MTK Flash File (Firmware/Stock ROM), you have come to the right place. This firmware file is read and verified from a working motherboard using official service dongles (CM2 / Miracle Box / UnlockTool) and is 100% tested.

This file resolves software errors, bootloops, security code locks, white screen glitches, and dead boot problems.


Common Issues Fixed by this Firmware: Dead Boot / Hard Brick Recovery: Revives the phone after a bad flash or sudden shutoff. Hang on Logo: Eliminates boot loop where the device stays frozen at the GDL startup screen. White Screen / LCD Display Glitches: Restores proper display drivers after incorrect firmware installation. Privacy Code / Phone Lock Removal: Clears lost PIN codes and key locks without damaging network calibrations. Baseband / Network / IMEI Fix: Resolves null baseband and software network dropping. Restart Problem: Solves continuous restarting issues caused by corrupted ROM partitions. Requirements Before Flashing: USB Driver: MTK USB All Driver / MediaTek VCOM Drivers installed on your PC. Flash Tool / Dongle: Infinity Box CM2MTK, Miracle Box / Thunder, NCK Dongle, or SP Flash Tool. USB Cable: A functional Micro-USB data cable. Device Battery: Charge the battery to at least 50% before initiating the process. Step-by-Step Flashing Guide Extract Archive: Download and extract GDL G2 MTK 60TK.7z using 7-Zip or WinRAR. Open Software: Run your preferred flashing tool (e.g., CM2MTK or Miracle Box) as Administrator. Select CPU / Model: Choose the MT6261 chipset under the MediaTek button/feature phone tab. Load Firmware: Click Open / Select Flash File and load the .bin firmware file. Start Process: Click Write Flash (or Start Button) in the software. Connect Phone: Remove the phone battery and re-insert it. Hold the device's boot key (often the Call key, Central OK button, or * / # key). Insert the USB cable while holding the boot key. Wait for Completion: Flashing will begin and take 1 to 3 minutes. Do not disconnect the cable until you see "Done / Write OK / 100%". Reboot: Disconnect the cable, re-insert the battery, and power on your phone.


Common Issues Fixed by this Firmware:

  • Dead Boot / Hard Brick Recovery: Revives the phone after a bad flash or sudden shutoff.

  • Hang on Logo: Eliminates boot loop where the device stays frozen at the GDL startup screen.

  • White Screen / LCD Display Glitches: Restores proper display drivers after incorrect firmware installation.

  • Privacy Code / Phone Lock Removal: Clears lost PIN codes and key locks without damaging network calibrations.

  • Baseband / Network / IMEI Fix: Resolves null baseband and software network dropping.

  • Restart Problem: Solves continuous restarting issues caused by corrupted ROM partitions.

Requirements Before Flashing:

  1. USB Driver: MTK USB All Driver / MediaTek VCOM Drivers installed on your PC.

  2. Flash Tool / Dongle: Infinity Box CM2MTK, Miracle Box / Thunder, NCK Dongle, or SP Flash Tool.

  3. USB Cable: A functional Micro-USB data cable.

  4. Device Battery: Charge the battery to at least 50% before initiating the process.

Step-by-Step Flashing Guide

  1. Extract Archive: Download and extract GDL G2 MTK 60TK.7z using 7-Zip or WinRAR.

  2. Open Software: Run your preferred flashing tool (e.g., CM2MTK or Miracle Box) as Administrator.

  3. Select CPU / Model: Choose the MT6261 chipset under the MediaTek button/feature phone tab.

  4. Load Firmware: Click Open / Select Flash File and load the .bin firmware file.

  5. Start Process: Click Write Flash (or Start Button) in the software.

  6. Connect Phone:

    • Remove the phone battery and re-insert it.

    • Hold the device's boot key (often the Call key, Central OK button, or * / # key).

    • Insert the USB cable while holding the boot key.

  7. Wait for Completion: Flashing will begin and take 1 to 3 minutes. Do not disconnect the cable until you see "Done / Write OK / 100%".

  8. Reboot: Disconnect the cable, re-insert the battery, and power on your phone.


GDL G2 Flash File (Firmware) MTK MT6261 DOWNLOAD

File Information & Technical Specs


SpecificationDetails
Brand / ModelGDL G2
Processor (CPU)MediaTek MT6261 / MT6261DA
Hardware / PlatformMTK Feature Phone
ROM TypeOfficial Stock Firmware (Bin format)
File Size~4 MB (Compressed in 7z format)
File NameFLYCOM61D_M225_Q180_GDL_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V13.bin
Read ToolInfinity CM2 MTK / Miracle Box
File StatusPaid / Verified Working File
Price60 BDT (TK)





Download & Payment Notice

Payment & Delivery Instructions:

  • File Name: GDL G2 MTK 60TK.7z

  • File Price: 60 BDT

  • Payment Method: bKash / Nagad / Rocket (Personal Send Money)

     Bkash Number - 01870635963

 

  • Contact for Password / Direct Download Link: WhatsApp / Telegram / IMO: [Insert Contact Number / Admin ID Here]

Note: Please double-check your motherboard version and CPU IC number before flashing to ensure full hardware compatibility. Always take a full flash readout/backup of your phone before writing new firmware.

Comments

Post a Comment